VIRTUAL INSTRUCTOR LED TRAINING (VILT)
23 - 27 AUGUST 2021 | 5 half-day training, 4 hours per session (total 20 hours)
About The Course
Suitable for supercritical boiler and steam drum.
This course provides detailed description of all the tuning methods for all the control systems used in pulverized coal boilers, circulating fluidized bed (CFB) boilers, cyclone boilers, and stocker boilers. This course provides a comprehensive explanation of all boiler control systems including drum level feedwater control, fuel and air control, oxygen trim control, steam temperature control, combustion control, purge control, flame monitoring and tripping system as well as their tuning methods.
The various boiler control strategies are covered including feedback, feedforward, cascade and ratio control as well as Ziegler Nichols tuning and Ciancone tuning methods. The course provides detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly.
The various methods used to calculate the boiler efficiency are covered in detail in this seminar including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly.
The course covers also all the methods used to improve the efficiency of pulverized coal boilers, CFB boilers and stoker boilers including improvement to their combustion efficiency and control systems performance.
SGD 3,099 / USD 2,262 for 5 half-days, per participant
SGD 3,299 / USD 2,408 for 5 half-days, per participant
- Boiler Control Systems Tuning Methods: Gain a thorough understanding of all boiler control systems tuning methods for pulverized coal boilers, CFB boilers, cyclone boilers, and stoker boilers
- Boiler Control Systems: Gain an in-depth understanding of all boiler control systems including drum level feedwater control, fuel and air control, oxygen trim control, steam temperature control, combustion control, purge control, and flame monitoring and tripping system
- Boiler Control Strategies: Learn about boiler control strategies including feedback, feedforward, cascade, and ratio control
- Tuning Methods: Gain a thorough understanding of boiler control systems tuning methods including Ziegler Nichols and Ciancone tuning methods
- Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code): Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code
- Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic: Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic
- Boiler Efficiency Calculations: Learn how to calculate the boiler efficiency using the direct and indirect methods
- Factors Affecting the Efficiency and Emissions of Boilers: Understand all the factors which affect the boiler efficiency and emissions
- Methods Used to Improve the Efficiency of Boilers: Learn about all the methods used to improve the efficiency of pulverized coal boilers, CFB boilers, and stoker boilers including improvement to their combustion efficiency and control systems performance
- Boiler Instrument and Piping Diagrams: Gain an in-depth understanding of all boiler instrument and piping diagrams
- CFB and Pulverized Coal Boilers Equipment and Systems: Learn about various types of equipment and systems used in CFB and pulverized coal boilers including: economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.
Who Should Attend
- Engineers of all disciplines
- Maintenance personnel
- Other technical individuals
Expert Course Faculty
Your specialist course leader has more than 32 years of practical engineering experience with Ontario Power Generation (OPG), one of the largest electric utility in North America. He was previously involved in research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.
While working at OPG, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time, he worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.
In addition, he has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as “Excellent” or “Very Good” by the delegates who attended his seminars and lectures.
He written 5 books for working engineers from which 3 have been published by McGraw-Hill, New York. Below is a list of the books authored by him;
- Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
- Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
- Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
- Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999)
- Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
Furthermore, he has received the following awards:
- The first “Excellence in Teaching” award offered by PowerEdge, Singapore, in December 2016
- The first “Excellence in Teaching” award offered by the Professional Development Center at University of Toronto (May, 1996).
- The “Excellence in Teaching Award” in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world,it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
- Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
Lastly, he was awarded his Bachelor of Engineering Degree “with distinction” from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.
TESTIMONIALS FROM PAST PARTICIPANTS
“Great seminar held for a week. Simple exam can check how much I’ve learnt and summarize the important points of the chapter and revision.” – Engineer, CLP Power Hong Kong Limited
“The 5-day training was informative. We’ve learnt a lot on computing boiler efficiency, the boiler code NFPA85 and standard tuning ciancone & Ziegler Nichols. The trainer is excellent in discussing all the topics.” – DCS Superintendent, GNPower Mariveles Coal Plant
“You will surely come out of this training with a better grasp of the Boiler Tuning fundamentals. Highly recommended especially for Performance Engineer.” – Plant Reliability Department Manager, KEPCO Ilijan Corporation
This training course will be conducted as a Virtual Instructor Led Training (VILT). Delegates will receive a confirmation email after successful registration.
Soft copy course materials & Certification of Completion will be provided to registered participants.
Unique Features with powerEDGE Training
- Pre-Course Questionnaire (PCQ) to help us focus on your learning objectives
- Detailed course & reference manual for continuous learning and sharing
- Practical exercises & case examples to better understand the principles
- Limited class size to ensure one-to-one interactivity
- Assessment at the end of the course to help you develop a personal action plan