BEST OPERATION PRACTICES FOR A HYDRO-ELECTRIC POWER PLANT
23 - 25 SEPTEMBER 2019, KUALA LUMPUR, MALAYSIA
About The Course
This seminar will provide a comprehensive understanding of all the best operation practices for a hydro-electric power plant. The design and operation of a hydro-electric power plant and all its equipment are covered in detail in this seminar. The main focus of the seminar is on the best practice guidelines to optimize the performance of every equipment in the hydro-electric power plant. This includes turbine, governing system, transformers, generator, instrumentation and control systems. All the methods used to optimize the performance of a hydro-electric power plant to meet international standards will be discussed in detail in this seminar. This includes optimization of the plant management, plant automation, upgrading the hydro-electric power plant to a computer-based supervisory control and Data Acquisition (SCADA) system, and optimization of all equipment operation, surveillance, monitoring, testing, and maintenance.
This seminar is also focused on using advanced algorithms to optimize the generator efficiency, and optimization of a hydro-electric power plant performance by selecting specific operating parameters such as the most efficient load, maximum sustainable load, fixed turbine flow, headwater/tailwater elevation control, load following/automatic generation control, condensing reactive power control, automatic load reduction and reinstatement for temperature considerations. The seminar will also cover in detail all the inspection methods and tests required to identify faults and deficiencies in hydro-electric power plant equipment, as well as, the most advanced repair techniques and refurbishment methods.
This seminar will also cover all the activities required to commission this equipment and all protective systems associated with it. The objective of the seminar is to maximize the performance, efficiency, reliability, and longevity of hydro-electric power plants by providing the best guidelines and practices for operating and maintaining them.
This seminar is a MUST for anyone who is involved in operating, managing, inspecting, testing, maintaining or refurbishing hydro-electric power plants because it covers the best operation methods and provides the necessary guidelines and rules that ensure the successful repair and refurbishment of hydro-electric power plants. In addition, this seminar will cover in detail the advanced fault detection techniques, critical components and all modern troubleshooting and commissioning methods which increases the reliability, and capacity factor (power output) of hydro-electric power plants and minimizes their forced outages, and operation and maintenance costs.
- Best Operation Practices for Hydro-Electric Power Plants: Gain a thorough understanding of the best operation practices for hydro-electric power plants
- Hydro-Electric Power Plant Design and Operation: Learn about hydro-electric power plant design and operation
- Optimization of Hydro-Electric Power Plant Performance to Meet International Standards: Learn all the methods used to allow hydro-electric power plants to meet international standards of performance
- Optimization of Hydro-Electric Power Plant Equipment Performance: Understand all the techniques used to optimize power plant equipment performance and allow them to meet international standards
- Optimize hydro-Electric Power Plant Management: Learn the methods used to optimize hydro-electric power plant Management
- Automation and Upgrades Required for a Hydro-Electric Power Plant: Gain a thorough understanding of all the automation and upgrades required for a hydro-electric power plant to improve its performance
- Hydro-Electric Power Plant Upgrade to a Computer-Based Supervisory Control and Data Acquisition (SCADA): Understand how to upgrade a hydro-electric power plant to a computer-based SCADA
- Using Advanced Algorithms to Optimize the Generator Efficiency: Learn how to use advanced algorithms to optimize the generator efficiency
- Best Practices for Reliability, Monitoring and Maintenance of a Hydro-Electric Power plants: Understand all the methods used to improve the reliability, monitoring and maintenance of hydro-electric power plants
- Optimization of Hydro-Electric Power Plant Performance by Selecting Specific Operating Parameters: Learn how to optimize hydro-electric power plant performance by selecting the most efficient load, maximum sustainable load, fixed turbine flow, headwater/tailwater elevation control, load following/automatic generation control, condensing reactive power control, automatic load reduction and reinstatement for temperature considerations
- Hydro-Electric Equipment Diagnostics: Learn in detail all the required diagnostic techniques for all critical components of hydro-electric power plant equipment such as turbines, governing systems, transformers and generators.
- Hydro-Electric Power Plant Equipment Testing: Understand in detail all the tests required for the various types of hydro-electric power plant equipment
- Hydro-Electric Power Plant Equipment Maintenance and Troubleshooting: Determine the best maintenance and troubleshooting activities required to minimize hydro-electric power plant equipment downtime and operating cost.
- Hydro-Electric Power Plant Equipment Repair and Refurbishment: Obtain a detailed understanding of the various methods used to repair and refurbish all hydro-electric power plant equipment.
- Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of all types of hydro-electric power plant equipment.
- Protective Systems: Obtain a detailed understanding of all protective systems required for different types of hydro-electric power plant equipment.
Who Should Attend
- Engineers of all disciplines
- Maintenance personnel
- Other technical individuals
Expert Course Faculty
The trainer has been a teacher at University of Toronto and Dalhousie University, Canada for more than 25 years. In addition, He has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as “Excellent” or “Very Good” by the delegates who attended his seminars and lectures.
The trainer wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by him:
- Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
- Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
- Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
- Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
- Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
The trainer has received the following awards:
- The first “Excellence in Teaching” award offered by Poweredge Asia Training center, Singapore, December 2016
- The first “Excellence in Teaching” award offered by the Professional Development Center at University of Toronto (May, 1996).
- The “Excellence in Teaching Award” in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
- Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
- Entrance Scholarship to University of Ottawa (1984).
- Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).
The trainer performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 32 years of practical engineering experience with Ontario Power Generation (OPG – formerly, Ontario Hydro – the largest electric utility in North America). He retired from OPG in November 2016.
While working at Ontario Hydro, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that the trainer worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by him covered in detail the various equipment and systems used in power stations.
The trainer was awarded his Bachelor of Engineering Degree “with distinction” from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.
Hydro-Electric Power Plant Design
Classification of Hydro-Electric Power Plants
Economics of Hydro-electric Power Plants
Optimization of Turbine and Generator Performance
Best Practices for Reliability, Operation
Power Station Protective Systems
This training course has a limited attendance for up to 20 participants only. Sessions commence at 9am on all days, with short intervals at 10.30am and 3.30pm respectively.
Refreshments will be provided in the short intervals. Lunch will be provided at 12:30pm for 1 hour. Sessions will end at 5pm on all days.
Unique Features with powerEDGE Training
• Pre-Course Questionnaire to help us focus on your learning objectives
• Detailed Course & Reference Manual for Continuous Learning and Sharing
• Practical Exercises & Case Examples to better understand the principles
• Limited class size to ensure One-to-One Interactivity
• Assessment at the end of the course to help you develop a Personal Action Plan