COAL POWER PLANT OPERATION AND MAINTENANCE
19 - 21 NOVEMBER 2018, KUALA LUMPUR, MALAYSIA
About The Course
This seminar provides detailed description of coal power plant operation and maintenance. All the methods and procedures used to operate and perform maintenance and refurbishment activities in coal power plants will be covered in detail. All the techniques used to monitor the performance and efficiency of pulverized coal and circulating fluidized bed coal power plants and improve their heat rate (increase the efficiency) will be covered. All the processes, operational and maintenance activities, capital projects, technical options, potential initiatives and incentives to implement upgrades/repairs for increasing the plant efficiency, reliability and safety will be covered in detail. This seminar will also provide in-depth explanation of all the equipment and systems used in coal power plants. This includes, boilers, superheaters, reheaters, turbines, condensers, feedwater heaters, deaerators, pumps, compressors, fans, coal handling system, ash handling system, transformers, electric generators, instrumentation and control systems, and governing systems, etc. All the factors which affect power plant performance, efficiency, reliability, safety and emissions will be explained thoroughly. All the areas in pulverized coal and circulating fluidized bed power plants where efficiency loss can occur will be explained. This seminar will also provide up-dated information in respect to the following topics:
- Performing Boiler Maintenance and Refurbishment
- Performing Steam Turbine Maintenance and Refurbishment
- Improving Coal Power Plant Heat Rate, Capacity Factor, Reliability and Safety
- Performing Transformer and Generator Maintenance and Refurbishment
- Coal Power Plant Operation: Understand how all the equipment and systems used in coal power plants operate
- Coal Power Plant Maintenance: Gain a thorough understanding of all the maintenance methods and refurbishment procedures of every equipment and system used in coal power plants
- Coal Power Plants Performance and Efficiency: Learn all the techniques used to monitor coal power plant performance and efficiency
- Calculating the Heat Rate of Coal Power Plants: Learn all the methods used to calculate the heat rate of coal power plants
- Coal Power Plant Tests: Discover all the tests required for all the equipment and systems of coal power plants
- Coal Power Plant Reliability and Safety: Understand all the methods used to enhance the reliability and safety of coal power plants
- Processes, Operational and Maintenance Activities: Discover all the processes, operational and maintenance activities used to improve the heat rate, reliability and safety of coal power plants
- Potential Initiatives and Incentives to Implement Upgrades/Repairs for Improving the Heat Rate: Discover all the potential initiatives and incentives to implement upgrades/repairs for improving the heat rate, reliability and safety of coal power plants
- Factors Affecting Coal Power Plant Efficiency, Reliability, Safety and Emissions: Learn about all the factors which affect coal power plants efficiency reliability, safety and emissions
Who Should Attend
- Engineers of all disciplines
- Maintenance personnel
- Other technical individuals
Course Faculty - Philip Kiameh
Has more than 32 years of practical engineering experience with Ontario Power Generation as an Engineering Supervisor and Training Manager, has conduct courses and seminars, to more than 4,000 working engineers and professionals who consistently ranked him as “Excellent” or “Very Good”. Philip has also wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York.
Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 25 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as “Excellent” or “Very Good” by the delegates who attended his seminars and lectures.
Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:
1- Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
2- Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
3- Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
4- Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
5- Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).
Prof. Kiameh has received the following awards:
- The first “Excellence in Teaching” award offered by Poweredge Pte Ltd Training Center, Singapore, December 2016
- The first “Excellence in Teaching” award offered by the Professional Development Center at University of Toronto (May, 1996).
- The “Excellence in Teaching Award” in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
- Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
- Entrance Scholarship to University of Ottawa (1984).
- Natural Science and Engineering Research Counsel (NSERC) scholarship towards Graduate studies – Master of Applied Science in Engineering (1984 – 1985).
Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 32 years of practical engineering experience with Ontario Power Generation (OPG – formerly, Ontario Hydro – the largest electric utility in North America). Prof. Kiameh retired from OPG in November 2016.
While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.
Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.
Professor Philip Kiameh was awarded his Bachelor of Engineering Degree “with distinction” from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.
Review of Coal Power Plants Thermodynamics
Layout of Steam Power Plants
Efficiency Loss in Coal Power Plants
Factors Influencing Power Plant Efficiency
Reliability, Safety and Emissions
Steam Turbine Maintenance
Degradation of Boiler Components
Electric Generator Operation and Maintenance
This training course has a limited attendance for up to 20 participants only. Sessions commence at 9am on all days, with short intervals at 10.30am and 3.30pm respectively. Refreshments will be provided in the short intervals. Lunch will be provided at 12:30pm for 1 hour. Sessions will end at 5pm on all days.
Unique Features with powerEDGE Training
• Pre-Course Questionnaire to help us focus on your learning objectives
• Detailed Course & Reference Manual for Continuous Learning and Sharing
• Practical Exercises & Case Examples to better understand the principles
• Limited class size to ensure One-to-One Interactivity
• Assessment at the end of the course to help you develop a Personal Action Plan