ELECTRICAL GENERATORS, EXCITATION SYSTEMS, AND GOVERNING SYSTEMS

10 - 14 DECEMBER 2018, KUALA LUMPUR, MALAYSIA

About The Course

This seminar will provide a comprehensive understanding of the various types of generators, exciters, automatic voltage regulators (AVR’s), and protective systems.  This seminar will focus on maximizing the efficiency, reliability, and longevity of this equipment by providing an understanding of the characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance.  The emphasis in this seminar is on inspection methods, diagnostic testing, troubleshooting, modern maintenance techniques, refurbishment, rewind and upgrade options, and advanced methods for preventing partial discharge and other failures.

 

This seminar is a MUST for anyone who is involved in the selection, applications, or maintenance of generators, exciters, automatic voltage regulators (AVR’s), and protective systems because it covers how this equipment operates, the latest maintenance techniques, and provides guidelines and rules that ensure the successful operation of this equipment. In addition, this seminar will cover in detail the basic design, operating characteristics, specification, selection criteria, advanced fault detection techniques, critical components and all preventive and predictive maintenance methods in order to increase reliability of the equipment and reduce the operation and maintenance cost.

 

This seminar will provide the following information for all types of generators, exciters, automatic voltage regulators (AVR’s), and protective systems:

 

  • Basic Design
  • Specification
  • Selection Criteria
  • Sizing Calculations
  • Enclosures and Sealing Arrangements
  • Codes and Standards
  • Common Operational Problems
  • All Diagnostics, Troubleshooting, Testing, and Maintenance

Learning Outcomes

  • Equipment Operation: Gain a thorough understanding of the operating characteristics of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Diagnostics and Inspection: Learn in detail all the diagnostic techniques and inspections required of critical components of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Testing: Understand thoroughly all the tests required for the various types of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Maintenance and Troubleshooting: Determine all the maintenance and troubleshooting activities required to minimize the downtime and operating cost of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Repair and Refurbishment: Gain a detailed understanding of the various methods used to repair and refurbish generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Rewind and Upgrade Options: Discover all options available to rewind and upgrade the generator rotor and stator to enhance the output and reduce downtime
  • Efficiency, Reliability, and Longevity: Learn the various methods used to maximize the efficiency, reliability, and longevity of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Advanced Methods to Prevent Failure: Gain a thorough understanding of all the methods used to prevent partial discharge, and other failures in generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Sizing: Gain a detailed understanding of all the calculations and sizing techniques used for generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Design Features: Understand all the design features that improve the efficiency and reliability of generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Selection: Learn how to select generators, exciters, automatic voltage regulators (AVR’s), and protective systems by using the performance characteristics and selection criteria that you will learn in this seminar
  • Equipment Enclosures and Sealing Methods Learn about the various types of enclosures and sealing arrangements used for generators, exciters, automatic voltage regulators (AVR’s), and protective systems
  • Equipment Commissioning: Understand all the commissioning requirements for generators, exciters, automatic voltage regulators (AVR’s), and protective systems

Who Should Attend

  • Engineers of all disciplines
  • Managers
  • Technicians
  • Maintenance personnel
  • Other technical individuals

Course Faculty - Philip Kiameh

The trainer has been a teacher at University of Toronto and Dalhousie University, Canada for more than 25 years. In addition, He has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. He has been consistently ranked as “Excellent” or “Very Good” by the delegates who attended his seminars and lectures.

 

The trainer wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York.  Below is a list of the books authored by him:

  1. Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
  2. Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
  3. Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
  4. Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
  5. Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).

 

The trainer has received the following awards:

  1. The first “Excellence in Teaching” award offered by Poweredge Asia Training center, Singapore, December 2016
  2. The first “Excellence in Teaching” award offered by the Professional Development Center at University of Toronto (May, 1996).
  3. The “Excellence in Teaching Award” in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
  4. Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
  5. Entrance Scholarship to University of Ottawa (1984).
  6. Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).

The trainer performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories.  He also has more than 32 years of practical engineering experience with Ontario Power Generation (OPG – formerly, Ontario Hydro – the largest electric utility in North America). He retired from OPG in November 2016.

 

While working at Ontario Hydro, he acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that the trainer worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.

 

Later, he worked as the manager of a section dedicated to providing training for the staff at the power stations.  The training provided by him covered in detail the various equipment and systems used in power stations.

 

The trainer was awarded his Bachelor of Engineering Degree “with distinction” from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.

TOPICS COVERED

Synchronous Generators, Generator Stator and Rotor Construction

Generator Components, Auxiliaries and Excitation

Generator Main Connections, Generator Surveillance and Testing, Advanced

Methods for Preventing Partial Discharge, Performance and Operation of Generators

Generator Inspection and Maintenance, Generator Rotor Reliability and Life

Expectancy

This training course has a limited attendance for up to 20 participants only. Sessions commence at 9am on all days, with short intervals at 10.30am and 3.30pm respectively. Refreshments will be provided in the short intervals. Lunch will be provided at 12:30pm for 1 hour. Sessions will end at 5pm on all days.

Unique Features with powerEDGE Training

• Pre-Course Questionnaire to help us focus on your learning objectives
• Detailed Course & Reference Manual for Continuous Learning and Sharing
• Practical Exercises & Case Examples to better understand the principles
• Limited class size to ensure One-to-One Interactivity
• Assessment at the end of the course to help you develop a Personal Action Plan