COMMISSIONING AND START UP ACTIVITIES OF COAL POWER PLANTS

12 – 16 NOVEMBER 2018, KUALA LUMPUR, MALAYSIA

About The Course

This seminar provides a comprehensive understanding of all the commissioning and start-up activities of coal power plants. The Commissioning Management System of coal power plants is covered in detail in this seminar.  This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The seminar provides also a thorough understanding of all the commissioning requirements for boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this seminar.  This includes preparation – planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports.

 

This seminar is a MUST for anyone who is involved in the pre-commissioning or commissioning of any coal power plant equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures and instructions for every component in a coal power plant.  In addition, the seminar provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.

Learning Outcomes

  • Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Coal Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in coal power plants
  • Commissioning Management System of Coal Power Plants: Discover the benefits of the Commissioning Management System of coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report
  • Commissioning Procedures and Instructions for Boiler and Auxiliaries in Coal Power Plants: Learn about the commissioning procedures and instructions for boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil – out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, safety valve setting, and soot blowers.
  • Commissioning Procedures and Instructions for Turbine and Auxiliaries: Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging
  • Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator
  • Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors
  • Coal Power Plant Equipment and Systems: Learn about various coal power plant equipment and systems including: boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries

Who Should Attend

  • Engineers of all disciplines
  • Managers
  • Technicians
  • Maintenance personnel
  • Other technical individuals

Course Faculty - Philip Kiameh

Philip Kiameh

Has more than 32 years of practical engineering experience with Ontario Power Generation as an Engineering Supervisor and Training Manager, has conduct courses and seminars, to more than 4,000 working engineers and professionals who consistently ranked him as “Excellent” or “Very Good”. Philip has also wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York.

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 25 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as “Excellent” or “Very Good” by the delegates who attended his seminars and lectures.

Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:

 

1- Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.

2- Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.

3- Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.

4- Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).

5- Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).

 

Prof. Kiameh has received the following awards:

  1. The first “Excellence in Teaching” award offered by Poweredge Pte Ltd Training Center, Singapore, December 2016
  2. The first “Excellence in Teaching” award offered by the Professional Development Center at University of Toronto (May, 1996).
  3. The “Excellence in Teaching Award” in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
  4. Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
  5. Entrance Scholarship to University of Ottawa (1984).
  6. Natural Science and Engineering Research Counsel (NSERC) scholarship towards Graduate studies – Master of Applied Science in Engineering (1984 – 1985).

Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 32 years of practical engineering experience with Ontario Power Generation (OPG – formerly, Ontario Hydro – the largest electric utility in North America). Prof. Kiameh retired from OPG in November 2016.

 

While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.

 

Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.

 

Professor Philip Kiameh was awarded his Bachelor of Engineering Degree “with distinction” from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.

TOPICS COVERED

Commissioning Management System

Commissioning of Boiler and Auxiliaries

Commissioning of Electrostatic Precipitators

Commissioning of Fuel Oil System

Preparation for First Light-up

Commissioning of Soot Blowers

Unique Features with powerEDGE Training

• Pre-Course Questionnaire to help us focus on your learning objectives
• Detailed Course & Reference Manual for Continuous Learning and Sharing
• Practical Exercises & Case Examples to better understand the principles
• Limited class size to ensure One-to-One Interactivity
• Assessment at the end of the course to help you develop a Personal Action Plan